9
MusiCall installation manual
UK
V14360903
Configuring the system
This part of the manual explaines how to configure the matrices. Normally these
settings are made once and adjusted when needed. A backup for all settings can be
made. If needed a system restore can be done to factory default or previous saved
settings.
Connecting a computer
The computer must be connected to the matrix using a UTP patchcable. The matrix
can also e connected to an existing networkby connecting the network to the
Ethernet
port
on
the
matrix.
Connected directly to a computer both
normal and cross patch cables can be
used.
When directly connected to the matrix
an IP address must be manually
assigned to the computer.
The MAX matrix can be configured using
http://musicall/config.html
. It can also be
reached using http://[matrix IP address]/config.html. If the IP address of the matrix is
unknown the matrix can be found using the Musicall_lookup program. The IP
address can also be found by connecting an MRC wallunit. The MRC wallunit will
display the matrix IP address on startup.
Supported browsers for configuring the matrix are:
Firefox 25 and up
Google Chrome 17 and up
•
Internet Explorer is no longer supported.
Make sure to keep your browser up to date. Always use the latest version.
!
!
