11
MusiCall installation manual
UK
V14360903
Inputs
The name of each input can be changed as desired using 12 characters maximum.
The prefered name will be visible on the wallunit and within the user webpages.
Click on the textbox of the input and type the preferred name.
Each auxiliary input can be selected mono or stereo. The checkbox ‘ST’
shows whether the input is used mono or stereo. The auxiliary name
also indicates whether the input is used mono or stereo. A mono input
will show in AUX2-L and AUX2-R. This corresponding to rear of the
matrix.
On the MAX8.8D and MAX8.16D the first five auxiliary inputs are used for tuner 1…4
and the web encoder (aux 5). The auxiliary inputs now function as direct outputs
from the tuners and encoder.
Each input can be assigned to be used global trough out
the matrix or can be assigned to a specific zone. When
assigned to a specific zone the input is not available to
other zones. On page 14 the scroll list is explained.
It can occur input levels from different sources are slightly different. These
differences can be corrected using the input gain. Each input can be
independently corrected from -33 to +12dB.
Use the Mouse to adjust the input gain.
It is important to adjust all input signals to the same level. Otherwise steps in audio
level can be heard on switching sources.
!
!
