11.1.1. Configuring Sniper
When configuring Sniper you are increasing or decreasing the speed of the analogue sticks by
adjusting the y-axis and x-axis slider bars for each analogue stick. The y-axis is up and down
movement, the x-axis is left and right movement. The centre of a slider bar represents the
normal speed of the axis. When moving a slider bar to the left you are slowing down the x-axis
or y-axis. When moving a slider to the right you are speeding up the x-axis or y-axis.
In order to adjust each of the slider bars you need to scroll up or down to highlight the slider
bar which you would like to adjust. Whilst highlighting the chosen slider bar move each of the
sliders left or right. You can use any of the buttons shown in the following illustration:
Once you are happy with your configuration press the Start button to save the configuration. As
detailed under section ‘10’ you can now activate the feature with your chosen configuration.
11.2. Remap
Button remapping gives you the ultimate control
over the TurboFire EVO layout by allowing you to
choose which buttons should be pressed to activate
each control.
After entering the TurboFire EVO Menu as detailed
under section ‘9’, using the button select the
Remap image to enter the Remap configuration
screen. If you would like to return to the TurboFire
EVO Menu at any time press the Select button. As
shown in the following illustration, the Remap
configuration screen displays which buttons are
assigned to each of the controls.
11.2.1. Configuring Remap
In order to program which buttons should be pressed to activate each control, please follow
these steps:
