Batteries that have been enabled to work with Action Replay (Section 1)
always try to load Action Replay as soon as your PSP is switched on. This
means that once you have enabled your battery, you must always have
your Action Replay memory card inserted in order for the PSP to boot.
Quick-booting to the PSP’s browser menu
If you just want to access the PSP’s normal Home Menu (sometimes
known as the XMB) to use features like the media player, web browser or
saves manager, you can do so by holding down the PSP’s two shoulder
buttons (L+R) when you switch it on. Doing so causes your PSP to skip
Action Replay and load into the standard PSP browser menu.
From here, if you want to run Action Replay again, reboot the console
without holding the shoulder buttons.
Reverting your PSP battery to a standard battery
If you don’t wish to use Action Replay and want to revert your battery to
its original configuration, you can do this by returning it to the Action
Replay Battery Enabler and pressing the button
once
so that the light on
the right illuminates. This signifies that your battery is now back in normal
mode.
If you do this, you can’t use Action Replay again until you re-enable the
battery by following the steps in Section 1.
