. . . . . . . . . . . . . . . . . . . . . .
Datecs Ltd.
www.datecs.bg
Page 6
PP-60 User Manual v1.0
Getting Started
The PP-60 allows you to printer information from your PDA &
Smartphone. Before using the PP-60 thermal printer the battery
should be properly charged. The following Quick Start guide will
help to get your PP-60 ready for use.
Quick Start:
Steps
What to do
Purpose
Where to find more
information
1
Charge the PP-
60 rechargeable
battery pack as
recommended in
this manual.
The Lithium Ion
battery pack
should be fully
charged before
use to ensure
long battery life.
Charging Battery, Page 10
2
Load PP-60 print
media (Thermal
Paper)
PP-60 requires
Thermal paper for
printing.
Loading Paper, Page 12
3
Connecting PDA
to PP-60.
Attaching the
PDA to the PP-60
and securely
locking PDA
cover in place.
PDA Installation, Page 13
4
Install PP-60
Software
To print
information from
your device,
software needs to
be installed onto
your device.
Printing software is not
provided by Datecs.
Please contact your PP-60
reseller or Datecs Ltd. for
recommendations on
Third-Party solutions.
Developers should refer to
the section in this manual
on “Developing Solutions”.
Table 3