1 DATECS
Ltd.
www.datecs.bg
PP-55 User’s Manual Version 2.05
Page 42
Verify Printer Connected
(PocketPC)
Before proceeding to verify if the PP-55 and PrintManager is connected, it
is important to note that Step #3 requires setting the COM port communi-
cation speed. The PP-55 factory default is set to 115200 bps. Be sure to
select this communication speed.
Step #3: Notice that the battery voltage and
head temperature boxes are empty.
This is because the Print Manager
is not software connected to
the PP-55.
Set the Printer to [PP-55] and
COM port to [COM1: 115200]
as this is the default port settings.
Tap on the [Connect] button to
connect Print Manager to printer.
Step #4: Notice that the voltage and head
temperature boxes are now filled.
This indicates the current level of
the PP-55 rechargeable battery
and current head tempreture of
the print head.
This also indicates a connection
between PrintManager and the
PP-55.
Note:
If your results are not similar to the example above, check to see
if the PDA is properly seated in the PP-55's cradle. If you haven't
charged the printer's rechargeable batteries, its recommended
that the battery be charged as directed.
