1 DATECS
InfineaX-Mini
User manual
`
12
4. Operation Modes
To insert iPad mini in InfineaX-Mini, first remove all eight screws from top cover.
Then attach iPad mini to 9-pin lightning connector. After that, insert audio jack in iPad mini
connector.
4.1 Battery status level
(Press battery level button)
- Battery percentage above 75% – LEDs flash on green
- Battery percentage between 50-75% – LEDs blinks on green
- Battery percentage between 25-50% – LEDs blinks on orange
- Battery percentage between 10-25% – LEDs blinks on red
- Battery percentage under 10% – One red LED is blinks
(In operating mode)
- Low battery indicator - Battery percentage under 25% - one red LED is light all the time
4.2 Charging indication and current select
- When the device is charging, green led is light
- Charging current of iOS device can be select between 500mA and 1000mA, when is
charging via USB adapter
4.3 Automatic charge
- When the battery level is above 25% – InfineaX-Mini is automatically start to charge iPad
Mini. When battery level is drop under 10%, charge automatically will stop.
4.4 Vibration on scan
- This function can be enabled or disabled
4.5 Pass-through sync through mini USB
- Transferring data between iPad Mini and PC or MAC. This function can be enable or
disable.
4.6 Enable external speaker
- This function can be enabled or disabled (from setting or with right side button), switch
between rear and front speaker.
- When the rear speaker is active, blue led will light.
4.7 Bluetooth transferring data
- This function is allow to transfer data with other device via Bluetooth.
4.8 Reset the InfineaX-Mini
- Holding on same time status and scan button for ~5sec
