1 DATECS
EP-50
10
11
User’s Manual
PRECAUTIONS FOR HANDLING
Do not handle the equipment in the following manners, because problems
may result.
y
Do not use any other power source besides the accessory AC adapter. Also,
do not use the AC adapter for other purposes.
y
Do not print without paper.
y
Do not drop or put any foreign object, such as a clip, pin, or the like, inside the
printer.
y
Do not spill any liquid or spray any chemical-containing liquid over the
equipment.
y
Never use a pointed object, such as a pen, to operate the operation panel.
y
Do not use Scotch tape to fasten paper together for continuous use. It could
damage the printing head.
y
Never pull the set paper forcibly. When opening/closing the printer cover,
take care that the paper will not be caught. It could cause the paper to jam.
y
Be sure to use the specified paper. Use of other paper could deteriorate the
print quality or cause a problem with the printing head.
To Prevent and Spreading of Damage
y
Never touch the printing head motor, or paper cutting blade. Your finger may
be cut.
y
During power-on or immediately after printing, do not touch electrical parts or
moving parts, such as the mechanism, motor, internal dear, etc. They may be
very hot and can burn your hand/finger.
y
Be careful to avoid bodily injure or damaging other objects with an edge of
sheet metal.
y
Should any error occur while operating the equipment, stop it immediately
and disconnect the power plug from the plug socket.
y
Only a qualified serviceman is allowed to disassemble or repair the printer.
y
Should a problem occur, leave solving it to our serviceman. Do not
disassemble the equipment on your own.
y
When opening/closing the printer cover, and so on, be careful not to catch
your hand or finger on the equipment.
y
After using the equipment, turn off the power switch and unplug the AC
adapter from a plug socket.
y
Use a shielding wire or twisted pair wire for a signal line, in order to minimize
noise effect. Do not route the cable too long or connect it to a noisy device.
Connection to a noisy device could cause erroneous printing due to corrupt
data, and so on.
y
Use the equipment in an environment where there is s plug socket near the
main body and you can easily disconnect the power plug from it, to shut off the
power.
y
When the equipment will not be used for a long period of time, unplug it and
remove the paper roll from it.
y
When transporting the equipment, remove the paper roll from paper holder.
!