. . . . . . . . . . . . . . . . . . . . . .
Page 28
DPP-350 User Manual
Replacing Battery
To replace the battery in the DPP-350 thermal printer follow the
steps below.
Steps:
1.
Turn over the DPP-350 and place on a flat
surface. Rotate the (2) locking levers as
shown in the figure on the right.
Figure 16
2.
Lift the battery cover as showed in the
figure on the right.
Figure 17
3.
Lift the battery as shown in the figure on
the right.
Figure 18
4.
Detach the battery connector as shown in
the figure on the right. Reverse Steps 1-4
to install the new battery pack.
Figure 19