Datcon DT1300 Series, Руководство по эксплуатации

Страница: 15 / 32

DT1300 xx xx xx
20171220-V0
15
6. Fault rectification
6.1. Fault finding
The fault finding must be carried out by trained and
authorized personnel only!
Use only an Ex certificated measuring instrument when
measuring on the input (Ex) side.
•
The green indicator is dark
→
check the power supply.
If the supply voltage is OK, the instrument is defective.
•
There is no output signal
→
check the input signal.
If the input signal is OK, the instrument is defective.
•
There is no input signal
→
check the transmitter supply.
If the transmitter supply is OK, the transmitter is defective.
When the result of fault finding is that the DT1300 xx xx xx
is defective call the manufacturer service department.
6.2. Repairing
There is no user repairable part inside the instrument.
In accordance with
Chapter 2.1. Authorized personnel:
For safety and warranty reasons, any internal work on
the instrument must be carried out by DATCON
personnel.