Datawave 24HP, Руководство пользователя

Страница: 13 / 15

RS-232 WIRELESS BRIDGE USER’S MANAUL REV. 02 13
Fig. 11 Uart Rate Setting Example
Configuring the XBee Module
The RS-232 wireless bridge utilizes the Digi XBee module. Consequently, all radio settings can be read or
set with Digi AT commands or Digi X-CTU software. As a general rule the only commands that might
need be set are the Networking and Serial Interfacing commands. Any I/O commands or other features
are not used. See Digi’s website at
www.digi.com and the XBee user manual and discussion forums for
more information.