PROMPTER KIT FOR ENG CAMERAS TP-650
7
5. Slide the Glass frame,
item G
, on to the front of
the TP-650 ENG prompter rail,
item A
. Ensure
the upper part of the Glass Frame,
Item G
, is
leaning away from the camera position and
secure with the two wing nut screws,
item H
.
6. There are two slots on the inside left and right of
the Glass Frame,
Item G
. Guide/slide 60/40
Mirror Glass sheet,
item J
, into these slots from
above.
The
Red circle sticker
on the Mirror Glass, item
J, should be facing camera position / lens.
The
Green circle sticker
on
item J
should be
facing
toward the on screen talent
/
commentator.
7. Secure the glass sheet within the frame using the
cross head screws at the top of each frame slot.
8. Fit the adjustable mounting bracket with locking lever,
item F
, to the lower prompter rail
item B.
Marry the mounting hooks in
item B
in the holes in the bottom of
item F
to secure item F to B.
It should slide and click into place.
9. Decide if you need to use the TP-650 ENG
camera riser block or not.
Ideally you want the lens of your camera
positioned as close to the centre of the 60/40
mirror glass as possible.
In some cases depending on your camera and its
ENG camera plate the camera lens may already
be high enough.
