7
Assembly
1. Attach/screw the tripod
’s own quick release
plate to the screw holes on the base of the
TP-500 adjustable Camera plate,
Item A
.
Tip:
Add a second screw (not supplied)
through the tripod’s quick release plate. This
to stop
Item A
from being able to spin on
top of the tripod quick release plate.
2. Now slide and secure the tripod plate, with
Item A
on top, onto the head of the tripod or
dolly.
3. Remove the sliding camera plate from the
top of
Item A
. Do this by pressing in the
side screw on
Item A
once it has been
unscrewed half way.
4. Attach the camera plate from
Item A
to the
base of the DSLR camera. Now slide the
camera and plate into position on top of
Item A
.
5. Now slide the camera and plate back into
position on top of
Item A
.