Datavideo TLM-170H, Инструкция по эксплуатации, Страница: 10 / 19

10
Powering On
Menu Options
The TLM-170H is set up via on screen menus. To display the on screen menu press the MENU
button. The menus are navigated using the UP / DOWN buttons.
There are six menus: Video Processor,
PIP Feature Setting,
Audio Function Setting,
Special Function
I
,
Special Function II
System Information
Video Processor
The first menu to be displayed is the Video Processor Menu.
To access the Video Processor Menu press enter, the Brightness setting will be highlighted.
To adjust the Brightness press Enter again. An adjustment bar will appear at the bottom of the screen.
Use the Up / Down buttons to change the setting and then press Enter to store the new value and to
return to the main menu.
To select a different setting (Contrast, Saturation, Hue, Sharpness, Colour Temp.) use the Up / Down
buttons. Follow the same procedure to set the other values.
PIP Feature Setting
The PIP Feature Setting Menu allows you to adjust the appearance of the picture in picture. The
position, size, main source and sub source can be set in the menus.
To access the menu press enter so that PIP Mode is highlighted
To access the options for the selected setting press enter again, so that the option column is
highlighted - In this case Large PIP.
Use the Up / Down buttons to navigate the available options.
You can choose:
PIP Mode Large PIP / Small PIP
PIP Position Bottom-Right / Top-Left / Top-Right / Bottom
Left
PIP Main Source CVBS 1 / CVBS 2 / SVIDEO / COMP. –
Component / HDMI 1 / HDMI 2 / SDI
PIP Sub Source CVBS 1 / CVBS 2 / SVIDEO / COMP. –
Component / HDMI 1 / HDMI 2 / SDI
N.B. The PIP feature can only be one analogue source and one digital source. i.e. If the main source is analogue
then the sub source must be digital, or vice versa.
Examples: Main Source = Analogue source = CVBS / SVIDEO / COMP
Sub Source = Digital source = HDMI / SDI
Main Source = Digital source = HDMI / SDI