Datavideo TLM-102, Инструкция по эксплуатации

Страница: 11 / 22

11
Rear Panel
Ports Descriptions
Tally Light Input
Tally light information can be supplied
to the TLM-102 from Datavideo’s
switchers via this socket. Pin1 and pin6
represent “Red”. Pin3 and pin 8
represents “Green”. Pin4 and pin9
represents “GND”.
Service Only USB
Port
For service only. The two USB ports are used for
maintenance, firmware update or further function
upgrading Only by the original manufacturer. For
customers, please DO NOT use these service ports.
SDI Input & Loop
Through
BNC Input for HD / SD SDI with a loop through output.
HDMI Input & Loop
Through
Video and Audio input from an HDMI device.
DC In Socket DC In Socket for connecting 12V / 3A power supply. The
connection can be secured by screwing the outer fastening
ring of the DC In plug to the socket.
Note 1: the interfaces within the monitor 1 only provide signal sources for the
monitor1 and the interfaces within the monitor 2 provide signal sources for the
monitor 2 only.
Note2: The Tally Light Input and 12V DC IN interfaces are common interfaces for
both monitor 1 and monitor 2.
Tally Light
Input
DC IN
Socket
USB 2.0
port
HDMI Input &
Loop Through
SDI Input &
Loop Through
USB 2.0
port
HDMI Input &
Loop Through
SDI Input &
Loop Through