Datavideo TC-200, Быстрый старт

Страница: 23 / 31

15
Presentation
In CG-200 each object follows presentation (display) sequence that starts
when play command is given. All times are measured in seconds and
thousands of a second (milliseconds). Timing is accurate down to 20
msec. (50 Hz PAL mode) or 17 m sec (60 Hz NTSC mode).
Presentation sequence:
Start delay – optional delay after play command is given:
Start delay – optional delay after play command is given. This
option can be used to synchronize appearance of several objects
on page.
In effect – object appears on screen:
In effect – object appearance effect. Chose from number of different
slide, stretch or reveal options. In effect properties are:
Duration – sets effect duration. Appearance will be instant if this
value is not given.
Fade in – if checked object will fade in from completely transparent
to given transparency value. If unchecked, object will appear as-is.
Display – object is shown on screen. Options are:
Show for – display object for the set amount of time.
Show indefinitely – display object until end or stop command is
given.
Out effect – object disappears:
Out effect – object disappearance effect. Chose from number of
different slide, stretch or reveal options. Out effect properties are:
Duration – sets effect duration. Disappearance will be instant if this
value is not given.
Fade out – if checked object will fade out from normal transparency
to completely transparent. If unchecked, object transparency will not
change.
Repeat – presentation sequence will repeat indefinitely.