Datavideo TB-5, Инструкция по эксплуатации

Страница: 4 / 10

4
Introduction
The TB-5 Tally Box is an accessory for the SE-500 Vision Mixer; or SE-
800 Vision Mixer, together with the RMC-90 Remote Control Panel. The
TB-5 reads the 15 Pin Tally output from the SE-500 / RMC-90 and
provides two colour LED tally lights for each of the four input channels.
For longer cable runs the optional Datavideo CB-1 50m Extension
Cable is available. The CB-1 is a 50metre Male to Female 3.5mm
Jack Cable.
Connections
Connect the 12V 500mA Power supply to the DC IN socket.
Connect one end of the 15 Pin Tally Cable to the TALLY IN socket of the
TB-5. Connect the other end to the TALLY OUT socket on the SE-500, or
either one of the TALLY OUT sockets of the RMC-90 (TALLY A OUT or
TALLY B OUT).
Connect one end of the 4 x 3.5mm Jack Plug Cables to TALLY LED OUT
1, 2, 3 & 4. Connect the other end of each cable to a TD-1 Tally Light.
The TD-1 will glow AMBER, when the input channel is cued up, and then
RED when the input channel goes to live