Datavideo SE-500MU4K, Инструкция по эксплуатации

Страница: 11 / 16

11
3. AUX Button
Press and hold the AUX button to enable the
AUX output mode.
Follow the steps below to select the AUX
output source.
1. Press the AUX button
2. Press one of the channel buttons to
select a video source.
3. Press the AUX to exit.
4. Frame Rate Button
Press to switch the output frame rate.
Press and hold for about 1 second until the
LED lights up in sequence then release the
button; it should take about 1-2 seconds to
complete the switch.
5. RES Button
Press to switch the output resolution.
Press and hold for about 1 second until the
LED lights up in sequence then release the
button; it should take about 1-2 seconds to
complete the switch.