Datavideo RMC-190, Быстрый старт

Страница: 11 / 16

10
Tilt Up -
Calibrate the joystick upward
Tilt Down -
Calibrate the joystick downward
Zoom Tele -
Calibrate the joystick with Zoom Tele
Zoom Wide -
Calibrate the joystick with Zoom Wide
Free State -
Setting menu, no calibration is
required.
- Save
Save the calibration setting
- Cancel
Cancel the calibration setting
Speed
Setting
-
1. High
2. Middle
3. Low
Set control speed of the joystick.
Default
Setting
-
1. Yes
2. No
Restore the keyboard setting to
factory default.
Information - -
Related control keyboard
information
6.
Menu operation
After powered on, “USER PIN” will show on the controller’s screen. The initial
pin is “111111”.
•
Pin Error
：
When “USER PIN
：
ERROR” shows on screen, it indicates
incorrect input pin. Enter correct pin to go to next step
•
Pin Correct
：
Screen shows “ 1”; this indicates camera icon and
default camera number. If the controller is idle for a long time, the
current time will be automatically displayed on the screen. If there is still
no operation, the controller will enter sleep mode.
To enter OSD menu, press SETUP key. Screen shows “ADMIN PIN:” and default
admin pin is “111111“.
a. Camera Setting
Camera Setting option sets camera ID (Range from 1~7), the corresponding
protocol, baud rates and camera address of the target cameras. To control
the desired camera, simply select the corresponding camera ID.
1. Move the joystick up / down the options list under “CAMERA SETTING”
2. Right move the joystick or press ENT key to enter the selected option
menu. For example, after selecting “
：
”, press number keys to input
camera number (range from 1~7). If the input number falls outside this