Datavideo PTC-280NDI, Инструкция по эксплуатации

Страница: 46 / 132

46
7. Network Connection
The Ethernet port on the back panel of your PTC-280NDI allows you to
connect to camera from the PC/Laptop with Static or dynamic IP addresses. To
access and modify these network settings, you will need to login to the
camera’s web interface.
If this is your first time using the device, please note that the camera’s default
IP address is 192.168.100.88.
Set up direct connection between the camera and your PC/laptop as depicted
in the diagram below; remember to manually assign an IP address of
192.168.100.X to your PC/laptop.
Ethernet Cable
192.168.100.88 192.168.100.x
On your PC/laptop, open a web browser and in the address bar, enter the
camera’s default IP address, 192.168.100.88 then press the ENTER key which
should take you to login page of the web interface.