Datavideo KMU-200, Инструкция по эксплуатации, Страница: 52 / 64

52
Stop recording

While recording, the RECORD button is solid red.

Press and hold the RECORD button for approximately 2 seconds.

When the record function is terminating, the RECORD button turns from solid red,
then blinking red and finally to solid white.

When the RECORD button is solid white, this indicates that the record function has
been successfully terminated.
Stream Button
Press the STREAM button to start/stop streaming.
Start streaming

When idle, the STREAM button is solid white.

Press and hold the STREAM button for approximately 2 seconds.

When the stream function is activating, the STREAM button turns from solid white,
then blinking red and finally to solid red.

When the STREAM button is solid red, this indicates that the record function has
been successfully activated.
Stop streaming

While streaming, the STREAM button is solid red.

Press and hold the STREAM button for approximately 2 seconds.

When the stream function is terminating, the STREAM button turns from solid red,
then blinking red and finally to solid white.

When the STREAM button is solid white, this indicates that the stream function has
been successfully terminated.
Bitrate Button
Follow the steps below to switch the stream bitrate mode using the BITRATE button:

Press and hold one of the RECORD button and STREAM button until the pressed
button starts blinking red.

Continue holding down one of the RECORD button and the STREAM button while
pressing the BITRATE button to switch stream bitrate mode (H, M or L).
Note: The system will return to original settings if the BITRATE button push is not sensed.
The default bitrate is M.
Vertical Button
Press the Vertical button to switch the video orientation between Portrait and Landscape .