Datavideo HS-3200, Инструкция по эксплуатации

Страница: 14 / 168

14
1.2 Rear Panel Overview
SDI Video Inputs 1 – 8
The lower row of
SD/HD-SDI inputs are
labelled 1~4. The upper
row of SD/HD SDI inputs
are labelled 5~8.
HDMI Video Inputs 9 – 12
HDMI Video Inputs 9-12
The HDMI inputs are
labelled 9~12.
SYNC I/O
The HS-3200 can be
synchronized with other studio
equipment such as cameras.
REF IN accepts Tri-level or
Black Burst sync. REF LOOP can
be used to pass the sync signal
to other studio equipment such
as cameras or recorders.
See the section on
Genlock for
details.
SDI/HDMI Video Outputs
The SDI/HDMI video outputs
are user-defined outputs. Each
of these outputs has the
option to be:

Multiview

Program

Preview

P DSK

Clean Program

Clean Preview

Input 1 – 12
Ethernet Port
Used to connect the
switcher to the PC or
laptop so that the unit can
be controlled remotely via
PC software (
Chapter 3 ).
USB FW Upgrade Port
Connect the USB drive
containing the switcher’s
latest firmware files to this
port and start the
firmware upgrade process
on the OSD MENU.
Note: See Firmware
Update section for details.
DC IN
Connect the supplied 12 V
PSU to this 4 PIN XLR
socket
Pin 1 = GND ( - )
Pin 2 = NC
Pin 3 = NC
Pin 4 = VCC ( + )
AUDIO OUT
Supports two channels of the XLR
Balanced Audio output.
AUDIO IN
Supports four channels of the XLR
Balanced Audio Input.
See
Section 4.8 Audio for audio setup.
GPI OUT
The GPI socket can be used for
simple external control.
See Appendix 2 for more details.
TALLY OUT
The SE-3200 Tally Output port provides bi-
colour tally information to a number of
other Datavideo products, such as the ITC-
100 eight channel talkback system or the
Datavideo TLM range of monitors.
See Appendix 1 and Tally Mode for more
details.
HDMI OUT 1/2/3
The three HDMI outputs can only
display the Program View.
Stream Port
The Stream Port allows the user to
stream the program or video to
any IP network via the built-in
NVS-31 video streaming server.
Connect the laptop to this port to
directly access the NVS-31 for
configuration.
Note: See Chapter 7 for details.
The power button starts
and shuts down the
machine power.