Datavideo HDR-100, Быстрый старт

Страница: 20 / 33

19
Playing a M2T Track
It is playback M2T tracks to analogue monitors or recorders via the HD(YUV), HD-SDI or HDMI video outputs.
Use the Previous (
▲
) / Next ( ▲ ) Button(right)s to select the track you want to play, and then press the Play ( ► II)
Button.
It is also possible to set the HDR-100 to loop play. In loop play the track will seamlessly looped until stopped.
To set up loop play press the Menu Button to enter menu mode and then the FWD (
►► ) Button until SETUP
LOOP PLAY is displayed.
+
Press the Next ( ▲ ) Button(right) to enter the setup loop play menu, and then press the FWD ( ►► ) Button to
select ENABLE
Press the Next ( ▲ ) Button(right) to select SET and then press the Menu Button to return to track display.
When you press play the selected track will start playing, and will loop until the Stop ( ■ ) Button is pressed.
To cancel loop playback, follow the above procedure but select disable instead of enable.
Recording a track
To record from an analogue video source you first need to set the analog input –
see Video Input Source Menu for
more details
.
Press the Video Input Button so that it is illuminated. You should see the video source on your output monitor
Use the Next / Previous Buttons to select an empty track from the HDR-100 track list, one that shows a duration of
00:00:00:00 in the LCD display.
Not suitable - Track
has been recorded Suitable - Track is
empty
Press both the Record and Play/Pause Buttons simultaneously and the HDR-100 should start recording.
+
The counter should start counting and the REC
symbol should appear
If it does not start recording check the following:
There is an analogue video input present.
The Video Input Button is illuminated
The track you have selected on the HDR-100 is empty. The counter next to the TrackNo on the LCD display should b
showing 00:00:00:00.
There is some available space on the HDR-100 Hard Disk - Go to the FREE SPACE Menu and check that the HDR-