Datavideo HBT-30, Инструкция по эксплуатации

Страница: 21 / 32

21
4.2.2 Connection Steps
1. At first, please plug the bundled 56V DC IN adapter in the HBT-30
into the DC IN 56V interface which is located on the rear panel of
the HBT-30.
2. Please make sure that power cables of the PTC-280 x 3 and
ShowCast 100 x 1 are plugged.
3. Please use a DC 12V male to male power cable to connect from
the DC OUT 12V30W interface which is located on the rear panel of
the first HBT-15 to the DC 12V interface which is located on the rear
panel of the first PTC-280.
4. Please use an HDMI cable (max. 10M) to connect from the 4K
HDMI interface which is located on the rear panel of the first PTC-
280 to the HDMI IN interface which is located on the rear panel of
the first HBT-15.
5. Please use an RJ-45 DVIP cable to connect from the DVIP interface
which is located on the rear panel of the first PTC-280 to the DVIP
interface which is located on the rear panel of the first HBT-15.
6. Please use a 100M CAT 6A Ethernet cable to connect from the
HDBaseT interface which is located on the first HBT-15 to the CH1
HDBaseT IN interface which is located on the rear panel of the HBT-
30.
7. Please use an HDMI cable (max. 10M) to connect from the HDMI
OUT interface which is located on the rear panel of the HBT-30 to
the VIDEO IN HDMI 1 interface which is located on the rear panel of
the ShowCast 100.