Datavideo GO 500 REPLAY, Инструкция по эксплуатации

Страница: 8 / 16

8
How to Connect Internal Cables
Cable requirements:
• Cable No. 1-4: DC Plug Cable built into the RMK-6 (45 CM)
• Cable No. 6: HDMI Cable (100 CM)
• Cable No. 7: HDMI Cable (100 CM)
• Cable No. 8: HDMI Cable (50 CM)
• Cable No. 9: HDMI Cable (50 CM)
• Cable No. 10: HDMI Cable (50CM)
• Cable No. 11: Ethernet Cable
1. Connect one end of Cable No. 11 (Ethernet Cable) to LAN OUT on the rear panel of the NVS-25
and another end to the RMK-6 RACK’s RJ-45 Port on the inner side as indicated by the red
arrow shown in the diagram below.
2. Connect one end of Cable No. 10 (50CM HDMI Cable) to NVS-25 HDMI IN and another end to
HDMI Splitter HDMI OUT.
11
10