Datavideo DVS-200, Руководство по настройке

Страница: 5 / 28

Decklink Source
Here you can use an input card from Blackmagic Design to feed the channel directly from HDMI or
SDI sources. We currently support all Blackmagic Decklink, mini monitor and mini recorder cards
using the Desktop video 10.8.4 driver version.
As Blackmagic cards feed the system with uncompressed video you must set the H264 video and
AAC audio encoding options as required.
You can setup multiple sources if your card has more than one input or you are using multiple cards.
Select the source you want to use using the enable/disable buttons on the far right. To stop pulling
in any source select ‘Select No Pull URL’.
Datavideo Source
Here you can use an input card from Datavideo to feed the channel directly from HDMI or SDI
sources. The Datavideo cards use hardware video compression and software audio compression.
Please note that Bitrate is used when in CBR mode and Quality is used when in VBR mode. 1000 is
the lowest quality settings and 10000 is the highest.
You can setup multiple sources if your card has more than one input or you are using multiple cards.
Select the source you want to use using the enable/disable buttons on the far right. To stop pulling
in any sou
rce select ‘Select No Pull URL’.