Datavideo DN-60A, Инструкция по эксплуатации

Страница: 27 / 42

27
The DN-60A display will change from 00:00:00:00 to show the current
amount of video hours, minutes, seconds and frames captured after each
interval point is reached.
Note: If power is interrupted and then restored the unit will need to be
restarted.
Note: A new clip is created only at the beginning of a time lapse recording.
Frames are then added.
Note: This recording option is not available with HDV sources.
6.17 Using Pre-trigger Set Up
When this option is switched ON the DN-60A is always in a record-ready
mode when it is not in Play Mode. In this mode it is continuously storing live
IEEE-1394 data in its internal buffer which is 4 to 8 seconds in length. 4
seconds in DVC Pro 50 and 8 seconds in DV25, DVC Pro 25 and HDV. In this
manner, when a recording is started the last 4 to 8 seconds of history prior to
the trigger is then captured to CF card and video after the trigger is then
added into the file after it in the normal way.
Note: This mode is not saved when power is interrupted and the Pre-trigger
video buffer is flushed.
Note: This recording option is not available with HDV sources.