background image

 

FCC Compliance Statement 

This device complies with part 15 of the FCC rules. Operation is subject to the following 

two conditions: 

 

(1)

 

This device may not cause harmful interference, and  

(2)

 

This device must accept any interference received, including interference that may 

cause undesired operation. 

 

Warnings and Precautions 

1.

 

Read all of these warnings and save them for later reference. 

2.

 

Follow all warnings and instructions marked on this unit. 

3.

 

Unplug this unit from the wall outlet before cleaning. Do not use liquid or aerosol 
cleaners. Use a damp cloth for cleaning. 

4.

 

Do not use this unit in or near water. 

5.

 

Do not place this unit on an unstable cart, stand, or table. The unit may fall, causing 
serious damage. 

6.

 

Slots and openings on the cabinet top, back, and bottom are provided for 
ventilation. To ensure safe and reliable operation of this unit, and to protect it from 
overheating, do not block or cover these openings. Do not place this unit on a bed, 
sofa, rug, or similar surface, as the ventilation openings on the bottom of the 
cabinet will be blocked. This unit should never be placed near or over a heat 
register or radiator. This unit should not be placed in a built-in installation unless 
proper ventilation is provided. 

7.

 

This product should only be operated from the type of power source indicated on 
the marking label of the AC adapter. If you are not sure of the type of power 
available, consult your Datavideo dealer or your local power company. 

8.

 

Do not allow anything to rest on the power cord. Do not locate this unit where the 
power cord will be walked on, rolled over, or otherwise stressed. 

9.

 

If an extension cord must be used with this unit, make sure that the total of the 
ampere ratings on the products plugged into the extension cord do not exceed the 
extension cord’s rating. 

10.

 

Make sure that the total amperes of all the units that are plugged into a single wall 
outlet do not exceed 15 amperes. 

11.

 

Never push objects of any kind into this unit through the cabinet ventilation slots, 
as they may touch dangerous voltage points or short out parts that could result in 
risk of fire or electric shock. Never spill liquid of any kind onto or into this unit. 

Содержание DAC-50S

















Отзывы: