Datavideo 4K ShowCast STUDIO, Инструкция по эксплуатации

Страница: 39 / 98

39
Main Sub-Menu Options or Values Default Value
Enter
Scan
Select to scan for the connected cameras.
Camera
This provides a list of the connected cameras. Select one to configure.
Tally Mapping
Select and assign a tally channel to the selected camera from the list below:

Input 1

Input 2

Input 3

Input 4
Camera Control
Select a camera control protocol from the list below for connecting the cameras.

DVIP

RS-422

RS-232
Baud Rate
If RS-422 or RS-232 is selected, select a baud rate from the list below:

9600

19200

38400

57600

115200
IP
IPs of the cameras will be listed here if connected via DVIP.
Camera Info
This field provides camera information display such as Vendor ID, MB Version, FPGA Version, Motor
Version and DVIP Version.
Model
This field shows the model number of the selected camera.
Video Format
This sets the video format of the selected camera. The available resolutions are listed as follows:

2160p/60/59.94/50/30/29.97/25/24/23.98

1080p/60/59.94/50/30/29.97/25/24/23.98

1080i/60/59.94/50

720p/60/59.94/50