Datavan ARC Series, Руководство пользователя

Страница: 32 / 42

32
HARDWARE INSTALLATION HARDWARE INSTALLATION
Installing the Customer Display (Optional)
WARNINN:
Be sure to turn off the power of the Touch Terminal before making any
connection or disconnection.
1. Place the Touch Terminal on a soft and flat surface, with the LCD panel facing down. Then
adjust the stand to full upright position.
2. Remove the two screws securing the dummy cover on the stand arm. (a)
3. Remove the dummy cover. (b)
4. Pull the tab to reveal the cable connector. (c)
5. Connect the customer display’s interface cable to the cable connector. (d)
6. Push the revealing parts of the connected cables into the cable compartment. (e)
7. Align the screw holes of the customer display bracket with the screw holes on the stand.
Then secure the customer display to the Touch Terminal with the two screws. (f)
e
f
a
b
c
d