Version 1.1F
Operation Manual, JuniBox JB7210
and then press the High or Safe-Speed Duplication button
to start.
If using multiple master discs to produce different quantities of
duplicate discs, repeat steps 1 and 2 to load additional sets of masters
and blank discs. Then, press the High or Safe-Speed Duplication
button to start duplicating discs. The illustration below shows an
example of three disc sets, stacked in interleave mode with one on top
of another, for multiple-to-multiple duplication,
Duplication Simulation
This mode is used to test discs for writing by emulating a duplication
session and will not actually write to the discs. Follow the steps below
to start a duplication simulation session:
1) Load the master disc into the disc loader.
2) Load the desired quantity of blank discs on
top of the master disc.
3) Press the Test/Abort button to start. JuniBox will run the operation
until the disc loader is empty.
Important:
Duplication simulation will not work with DVD+R, DVD+RW and
DVD+R DL discs. When a DVD+ disc is detected it will be
rejected.
Erase a Stack of Rewritable Discs
21
This operation erases a stack of rewritable discs for
© 2008, Datatronics Technology, Inc.
