6
Copyright © Y.I.C. Technologies Ltd
All rights reserved.
Sentinel House, Ancells Business Park, Harvest Crescent, Fleet, Hampshire, GU51 2UZ, UK
EMProbe Connections:
RF
Connection:
connect the SMA side of the RF Cable to the probe held by the
Magician and the N Type side to the
spectrum analyzer
(RF Input).
USB
Connection:
connect the Magician to a PC using the USB cable.
Establish a Connection
After you have connected the Magician to the PC and powered it on, wait at least 30 seconds
for the software to detect it. You will see the EMProbe be detected by the software:
In some cases, the driver required
may not
be installed automatically. If the EMViewer
software cannot detect the scanner, the driver will need to be installed manually. A copy
of the
USB driver can be found on the PC in the following location:
C:\Program Files\YIC Technologies\EMViewer2\drivers\EMProbe
To manually install, copy the EMProbe folder to the desktop. Inside the copied folder, right
click on:
silabser.inf - > Install
You may delete the folder from your desktop once the driver is installed.
