On the
Settings
menu, you can set up the camera according to your preferences and
view information about your camera.
The
Settings
menu includes the following:
•
FLIR Ignite
•
Measurement parameters
.
•
Connections
•
Camera temperature range
•
Save options & storage
•
Device settings
13.1
FLIR Ignite
Sign in to FLIR Ignite and view information about the FLIR Ignite account the camera is
paired with.
Enable/disable automatic upload of images.
For more information about FLIR Ignite and online storage of images, see section 11
13.2
Measurement parameters
For accurate temperature measurements, it is important to use appropriate measure-
ment parameters. For more information, see section 8.6
13.3
Connections
Connect the camera to a Wi-Fi network. For more information, see section 12.1
.
Pair the camera with a Bluetooth device. For more information, see section 12.2
Advanced settings for firewall, trusted applications, and streaming authentication.
13.4
Camera temperature range
The camera is calibrated for different temperature ranges. The available temperature
range options depend on the camera model.
For accurate temperature measurements, you must select a temperature range that
matches the expected temperature of the object you are inspecting.
13.5
Save options & storage
•
Photo as separate JPEG
: A visual image is always saved in the same JPEG file as the
thermal image. Enabling this setting saves an extra low-resolution visual image as a
separate JPEG file.
•
Add note after saving
: The note tool will be displayed when an image has been saved.
•
Digital camera
: Turn on/off the digital camera. Turning off the digital camera can, for
example, be required in restricted areas and in confidential (e.g. doctor/patient) situa-
tions. When the digital camera is off, the images modes
Thermal MSX
and
Picture in
picture
are disabled.
•
Delete all saved files...
: This displays a dialog box where you can select to perma-
nently delete all saved files from the camera memory.
#T810624; r. AB/92323/92323; en-US
30
