Automatic
Manual
Here are two infrared images of an isolator in a power line. To make it easier to analyze
the temperature variations in the isolator, the temperature scale in the right image has
been changed to values close to the temperature of the isolator.
Automatic
Manual
8.4.2
Change mode
To change the image adjustment mode, select
Temperature scale
on the main toolbar.
Then select
Auto
or
Manual
.
8.4.3
Manual adjustment by touching the screen
When manual mode is active, an adjustment wheel is displayed to the right of the tem-
perature scale.
Figure 8.1
Manual adjustment mode active
#T810624; r. AF/93316/93316; en-US
19
