manualshive.com logo in svg

Datasat AP25, Инструкция по установке и эксплуатации

Поделиться
Скачать
Datasat AP25 Скачать руководство пользователя страница 69

 

AP25 Installation and Operating Guide 

 Page 69 

 

 

 

AP25 Installation & Operating Guide  

Document # 9301H79500 Ver. 1.00 

 

4.3.6  Format Options 

The Format Options screen allows changes to Global Delay, Extended Surround Options, Nonsync Level 
and Routing, Mic Level and Routing, Matrix and Routing, Digital Cinema Format Options, Decoder 
Setup and Film Options (if the optional Optical Film card (H338) is installed – see appendix F). It also 
provides feedback on the current Audio format.  

The options on this screen will change according to the currently selected input source.  Figure 44 below 
shows the options available when the input source is Nonsync.   

Menu (System) > Formats > Format Options 

 

Figure 44. Format Options Screen 

4.3.6.1 

Global Delay and Surround Offset 

This screen is available for all input sources. 

Menu (System) > Formats > Format Options > Global Delay and Surround Offset 

 

Figure 45. Global Delay and Surround Offset 

Содержание AP25











































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды