Datas Technology Node 4000, Руководство по установке

Страница: 19 / 42

Network and Option Configuration
Physical Address 00:D0:C9:37:40:86
IP Address 10.1.4.10
Subnet Mask 255.255.255.0
Default Gateway 10.1.4.1
DNS Server 10.1.2.111
Enterprise name D-100 Enterprise
Web Server Enabled
Web Server Security Disabled
Remote Access Server Enabled
RAS IP Port Address 0.0.0.0
Two-Way E-mail Responder Enabled
Microphone Listen-in Enabled
Datamodem Enabled
Press any key to return to main menu
Option 3 will allow you to set all pertinent network settings listed under Option 2.
Option 4 allows you to configure or reconfigure the Enterprise name.
Option 5 allows you to configure the Web server. When Web security is enabled, a Profile
Username & Password must be entered to view the web page. A sample of the Web configuration
menu is shown below:
Configure Web Server
1. Enable/Disable Web Server
2. Enable/Disable Web Password Security
3. Return to main menu
Option 6 allows you to configure the RAS (Remote Access Server). This can be used to provide
remote access to your network via a dial-up connection to the D-100 Host. Note that there are
serious security risks associated with enabling this feature. A sample of the RAS menu is shown
below:
Configure Remote Access Server
1. Enable/Disable RAS Support
2. RAS IP address
3. Return to main menu
Enter option->
Option 7 allows you to Enable or Disable the two-way email feature.
Option 8 allows you to monitor on-site sound through either the built-in or an external microphone.
Option 9 (Enable default Master Administrator Account (temporarily) should only be used in the
event that no Master Administrator accounts can be accessed (e.g. the password(s) were forgotten).
Network Configuration
19