Pre-Compliance v180808n
iBoot-WiFi
Page 21
10. DxP Protocol
iBoot-WiFi supports the Dataprobe Exchange Protocol (DxP) for inter device communications and to allow software
developers to integrate Dataprobe product into custom applications. Through the DxP protocol, the developer can:
•
Turn on and off power to the Outlet
•
Pulse the Power On or Off for a specified about of time.
•
Read the status of the Outlet
The DxP Protocol, as well as example code and scripts in a variety of languages are available at
http://dataprobe.com/support-iboot-wifi
11. Troubleshooting
The iBoot-WiFi has a recessed pushbutton switch in the event the unit is not performing as expected. Use the
pushbutton as follows:
Action
Result
Momentary
Soft Reset. Will not change outlet status.
5 Seconds push
Reset to Factory Defaults. Hold the button
in until the Outlet LED is blinking, then
release.
Network LED
Outlet LED
WPS
Pushbutton
Reset
Pushbutton
Power Outlet
12 Amps Max
Figure 25 iBoot-WiFi Orientation
