iBoot-PoE-P Quick Start Guide
V180802N
© 2018 Dataprobe Inc.
Hardware Connections
iBoot-PoE-P supports 10/100/1000 Ethernet using the cable supplied, or
other suitable unshielded twisted pair (Cat 5-6) cabling.
Power is derived from either the PSE, such as a PoE Network Switch or a
PoE Injector. The iBoot-PoE-P supports 802.3af Mode A, Mode B and
4PPoE wiring specifications, 9
– 72 VDC.
Connect the PoE OUT connector to the PoE Device to be
controlled (PD); Camera, Access Point, Phone, etc.
Connect the NET IN connector to the PoE Power source (PSE);
PoE Switch, Midspan or Injector.
PINS
Mode B
Voltage on Spare Pins
Mode A
Mixed Data and Voltage
4PPoE
(802.3bt Type 3 / 4 Draft
D1.2)
Voltage on all pins
1
DC +
DC +
2
DC +
DC +
3
DC -
DC -
4
DC +
DC +
5
DC +
DC +
6
DC -
DC -
7
DC -
DC -
8
DC -
DC -
Power Output on the PoE OUT connector will be identical to whatever mode is used on the NET IN
connector.
Quick Start Guide
PoE Switch or
PoE Injector
