Model 4P-MAS-30
Page 2
OPERATION
The 4P-MAS is controlled principally through an ASCII terminal interface. Access to this configuration
menu can be achieved either by: connecting via modem connected to the Master Port, or directly via
terminal (using a null cable) into the Master Port of the 4P-MAS. See page 6 for installation details.
The default parameters are: 9600 bps 8 data 1 stop no parity
.
All of these parameters can be changed through the programming menu.
Auto Rate Detect:
The 4P-MAS automatically determines the speed of the connection. If the Login
Prompt does not appear, press the Enter Key several times to enable the Auto Rate Detect.
Once connected to the 4P-MAS, the system sends a login prompt.
LOGIN >
Enter the Security Code.
The Factory Default Security Code is: TEST
. Please change this code
as soon as possible. Remember your code. When connecting through a modem, three incorrect
attempts to enter the security code will cause the 4P-MAS to terminate the call. When the correct code
is entered, the Main Menu appears:
A) PORT A
B) PORT B
C) PORT C
D) PORT D
1) LOCAL CONFIGURATION
X) EXIT
ENTER PORT >
This allows selection of any port, Local Configuration to access the programming menu or terminate the
current session. When Exit is selected, the 4P-MAS logs the user out and a new Login is required.
To select a port, enter the letter desired, followed by the Enter Key. Once a port is selected, the
4P-MAS will clear the screen and generate the following message:
PORT A SELECTED
ENTER ESC{PASSWORD}ESC TO RETURN TO MENU
At this point the Master Port is connected through to the port selected. The 4P-MAS is passive to the
messages sent between the Master Port and the port selected. To terminate the session with the
current port and bring back the menu, enter the escape character plus the security code and another
escape character. i.e.
E
s
C
TEST
E
s
C
