Dataplex OPTO-SPLITTER, Руководство пользователя

Страница: 12 / 20

DATAPLEX DEVICES—Opto-Splitters User Manual v1.2—09122020
12
OPERATION
RDM /DMX SERIAL LINK
OPTO-SPLITTER 1
X
8 XLR
1—Connect the 5-pin male connector of a DMX cable to the 5-pin female output connector of the lighting console.
2—Connect the female end of the DMX cable coming from the lighting console to the 5-pin male input connector
of the Opto-Splitter 1x8 XLR.
3—Connect additional DMX cables to output connectors of the Opto-Splitter Mini 1x5 RDM and link them to
fixtures, daisy-chaining as necessary.
Note: When using RDM enabled Opto-Splitters, ensure all linked devices support RDM. Some DMX receiving chips
are not able to process an RDM signal, causing the device to behave erratically. If a problem occurs contact your
device manufacturer
.