Your packing box should contain the following items:
The Vi1S video capture card.
1 x SD4-Cable.
1 x DVI-VGA, 1 x DVI/Component and 1 x DVI/HDMI
Adapters.
Installation CD-ROM.
(For latest drivers go to www.datapath.co.uk).
NOTE:
All plug-in cards are static sensitive and are packed in
antistatic materials. Please keep the card in its
packaging until you are ready to install.
You are likely to need a flat blade and a Phillips head
screwdriver for the installation of the capture card;
installing the card is a simple process, follow the steps
below to be up and running in a few minutes.
Power down the PC (including peripherals), switch off at
the mains and disconnect all the cables connected to the
computer, noting the positions for accurate reconnection.
Remove the PC cover.
Locate a vacant PCI Express (x4 or above) slot on the
motherboard and remove the backing plate (retain all
screws).
If in doubt consult your motherboard documentation to
correctly identify a PCI Express) slot. If the card is forced
into a 32 or 64 bit PCI or PCI-X slot it will be irreparably
damaged when the system is powered up and the warranty
will be void.
Remove the card from its packaging and secure it firmly
into the empty PCIe slot.
Extreme care should be taken when securing the card into
the slot as some motherboards may have components that
impede the siting of the card.
Screw the card bracket to the back panel of the PC and
replace the cover. Re-connect all cables to the PC.
Connect the input cables. Power up the PC and commence
the software installation.
Reconnect all cables to the PC then connect the cable
distributing the RGB/ DVI/video signals to the connectors
on the Vi1S card located on the back panel.
Insert the Datapath CD into your CD drive, the CD will
autorun and display the following dialogue. If the CD
drive fails to autorun browse the CD and locate and
double click the
setup.exe
file.
Click on
Install Software…
and follow the installation
Wizard instructions as prompted.
PACKING LIST
HARDWARE INSTALLATION
SOFTWARE INSTALLATION
We suggest that you regularly visit the Datapath web site
for information on updated drivers.
(www.datapath.co.uk
It is strongly recommended that you read the detailed
help instructions on completion of the installation. Each
help topic may be printed for ease of use.
