VGA Parameters
To access the VGA parameters menu, press the
V
key
and the following dialogue is displayed:
Press
F1
to move the display area up.
Press
F4
to move the display area down.
Press
F2
to move the display area to the left.
Press
F3
to move the display area to the right.
Press
F5
to zoom out.
Press
F6
to zoom in.
Press the
Space
bar to change the rate of the above-mentioned setting. This toggles the rate
of change between 1 and 10.
Press
M
to switch the video mode between:
Auto
– the mode is automatically detected and set by the unit.
DVI
– only DVI input is detected.
VGA
– only VGA input is detected.
Press
K
for automatic adjustment and positioning of the image area.
Press
I
to reset parameters to default values.
Press
S
to save the settings and exit the menu.
Press
Q
to exit without saving.
20
Arqa User Guide