Software Overview
The ActiveSQX requires little configuration to be up and running, the your software should detect the card
and allow you to add IP camera windows to your display wall. The card opens a gateway to the network
enabling the user to add, configure and modify IP cameras using the Datapath SQX software.
The application displays the connected source in a window on your desktop; it has the following features:
•
Scales the data to fit in the window
•
Ability to set up sources accurately (settings automatically saved)
•
Command line interface
Alternatively use the SQXEasy SDK.
Note:
The supplied drivers and software require that you are using:
•
Windows® 7 64 bit / Server 2012
•
CD / DVD ROM Drive
Software Installation
The
Datapath SQX software (driver and application) is installed by inserting the CD that was shipped with
your card into your DVD drive. The installation process should start automatically.
Should the DVD fail to autorun use
Explorer
to browse the CD, locate then double click on
install.exe
file e.g.
d:/install.exe
and click on
Install Software…
and follow the installation wizard instructions as
prompted.
Regular software updates are available from our website:
www.datapath.co.uk
Firmware Upgrades
The ActiveSQX cards allow firmware upgrades to be completed on site rather than returning the card to
Datapath. Whenever a firmware upgrade is performed, the
JP8
Link
MUST BE FITTED
on the
ActiveSQX card.
To perform the upgrade, follow the step-by-step instructions provided by the upgrade application.
In the unlikely event that something goes wrong during the upgrade process (e.g. System power outage)
it is possible to revert to the factory settings by powering down the system, temporarily removing the
JP8
link then powering up the system with the link removed.
8
Содержание activesqx
Страница 1: ...User Guide Version 1 0 0 ActiveSQX...
