DAP-SW1003
HDMI 4x2 Matrix Switcher
5.0 Panel Descriptions
6.0 Operation
Front button control
The “Output A” button will cycle Output A to the next input (1 through 4).
The “Output B” button will cycle Output B to the next input (1 through 4).
Remote control
The “ON/OFF” buttons will individually turn each respective output on/off.
The “1”, “2”, “3”, “4” buttons will switch to that input for the respective output.
The “Mute” button will mute the audio output from all audio connectors.
The “2CH" and "5.1CH" buttons will set the de-embedded audio output mode.
5.1ch audio can only be output from the Coaxial and TOSLINK connectors and only
if the source supports 5.1ch audio output over HDMI. The 3.5mm analogue audio
will only ever output 2ch audio.
