Datamax W-Class, Руководство по обслуживанию

Страница: 19 / 211

Adjustments and Maintenance
2-9
Advanced Entry Calibration (continued)
Paper Gap (or Mark) Empty
For example, at Gain Number 8,
these were the sensor readings for
each of the media conditions.
(Actual readings will vary.)
198 084 014
Step Action Displayed Message Comment
16 Press the Key.
Using the or the
Key, set the
‘Paper’ level to the value
determined in the previous
step. Press the
Key
to set the entry (indicated
by the ‘*’) and advance the
menu.
Repeat for the ‘Gap’ (or
‘Mark’) and ‘Empty’
levels.








Or, for reflective media:








The selection will flash and the
display heading will change to
indicate the item for entry.
17 After all entries have been
made, press the
Key to back out of the
menu and then press the
Key to save the
settings and return to the
Ready Mode.


From ‘
READY
’, press the
Key to advance to the
next label TOF.

Note: If the Advanced Entry Calibration fails, try the following procedure:
Re-enter the menu system. Go to
Media Settings

Calibration

Advanced Entry

Sensor Gain
and lower the selected Gain Setting number by one (to make the sensor less sensitive).
Select the new Gain Setting, save the changes, exit the menu, and then test your media. Repeat the
procedure until a usable media setting is obtained.