Datamax RP Series, Руководство пользователя

Страница: 17 / 30

RP SERIES OF PRINTERS USER'S GUIDE
14
Mounting the Printer
The following mounting options are available:

Mounting Brackets - For information on using
mounting brackets, refer to the documentation
included in the brackets' original packaging.

Unmounted - If the printer will not be mounted,
then an AC power adapter
and
a battery must be
used to supply power to the printer; however, using
the printer unmounted is not recommended.
Mounting Guidelines

The printer can only be mounted at a horizontal
angle less than 60°; do not mount the printer at an
angle greater than 60°.

When the printer is mounted, the paper should
always exit the printer at a downward slope.
Mounting the printer so that the paper exits at
another slope may result in paper jams.

The printer is heavy, therefore, use caution when
selecting a mounting location. Verify the mounting
surface can support the weight of the printer.

Position the printer with enough room to properly
open and close the printer's lid.

Position the printer so that it is protected from
environmental elements such as moisture, tools, and
boxes.

Do not position the printer above, near, or relative
to, the drivers's position as to interfere with normal
driving operations.

Position the printer away from the driver's head to
eliminate potential injury in the event of an accident.

Cabling:
All power to the printer must be fused.
Make sure the fuse box is connected properly.
Note: Standard RP printers can be mounted only if
mounting brackets are used.