Datamax OC2 BT, Техническое руководство и руководство пользователя

Страница: 63 / 69

17
Area Method Interval
Printhead/
roller Use only a Datamax-
O’Neilapproved cleaning card. After every ten (10)
rolls of media.
Tear bar Clean thoroughly with 70%
isopropyl alcohol on a cotton
swab. After every five (5)
rolls of media.
Exterior Use a soft cloth and mild cleanser As needed.
if necessary. Do not use abrasive
cleanser, chemicals or scrubbing
pads, which can damage the
printer's finish.
Troubleshooting
Symptom(s) Action
Printer does not print • Verify the printer is turned on.
•
Recharge or replace the battery.
•
Verify the battery is properly installed.
•
Check cable connections (if applicable).
•
Check radio card connections. If the radio card is not properly
connected, data will not be transmitted from the host terminal to
the printer.
Media/paper jam • Open the printhead cover and
reinstall media.
• Verify the media is properly installed.
For more information, see "Loading
media" on page 7.
• Clean the printhead and the media
cavity.
Reduced battery capacity • Recharge or replace battery.
Media does not feed • Verify the printhead cover is closed
and latched.
• Verify the label sensors are not
blocked.