Datamax OC-3 Series, Руководство пользователя

Страница: 17 / 28

U
SING THE CONTROL PANEL
13
Using the control panel
The tables on the following pages document the following:
•
Audio Indicators on page 13
• Battery Status LED on page 14
• Power Button/LED on page 15
• Media Function Button/LED on page 15
• Radio Button/LED on page 16
• Reset Button/LED on page 16
• CardReader Audio Indicators on page 16
Audio Indicators
Beep(s) Description Action
1 short Printer wakes up. None.
2 short Out of paper. Install paper.
3 short Low battery. Charge battery.
1 very short RF power is on.
Note: This beep occurs when you
press the RF power button and
the RF power was off.
None.
2 very short RF power is off.
Note: This beep occurs when you
press the RF power button and
the RF power was on.
None.
1 long Boot code is starting or
restarting. Redownload firmware.
8 short CRC error in firmware. Redownload firmware.
Figure Radio
Button/LED Figure Power
Button/LED Figure Battery
Status LED Figure
Reset
Button
Figure Media
Function
Button/LED