Datamax E Class, Руководство оператора

Страница: 57 / 72

Appendix C – Ethernet Setup 51
C
C
C
E
E
E
t
t
t
h
h
h
e
e
e
r
r
r
n
n
n
e
e
e
t
t
t
S
S
S
e
e
e
t
t
t
u
u
u
p
p
p
C
C
C
.
.
.
1
1
1
N
N
N
e
e
e
t
t
t
w
w
w
o
o
o
r
r
r
k
k
k
C
C
C
a
a
a
r
r
r
d
d
d
R
R
R
e
e
e
s
s
s
e
e
e
t
t
t
It is recommended that the printer’s communication settings be reset to factory defaults to avoid any conflicts
in configuration. To reset the printer’s communication settings:
Turn on the printer, when the three LEDs turn on press and hold the
F2
+
F3
buttons. Continue to hold these
buttons until all three lights turn off.
C
C
C
.
.
.
2
2
2
N
N
N
e
e
e
t
t
t
w
w
w
o
o
o
r
r
r
k
k
k
C
C
C
a
a
a
r
r
r
d
d
d
S
S
S
e
e
e
t
t
t
u
u
u
p
p
p
The Print Server makes IP requests at power-up, so before making a network connection to the printer
consider how your IP addressing needs to be assigned. The IP addressing of the Internal Ethernet Print Server
can be configured in one of two ways: Using a static IP Address or Using IP Discovery (DHCP, BootP, or RARP).
At factory default settings IP DISCOVERY is Enabled and the Wireless module is Disabled.
1. With Printer Off, connect the network cable then turn on Printer.
2. The printer will now search for a DHCP server. Allow up to 90 seconds for the printer to retrieve an IP address.
3. At this point it is recommended to print a Network Report. This Network
Report is generated by the printer and lists important default information
such as the IP and MAC Addresses as well as SSID for wireless equipped
cards. To print the ‘Network Report’:
Press the
F1
+
F2
+
F3
buttons at the same time.
4. Verify the printer has obtained a valid IP address for your network. If a
valid IP address was not obtained or you wish to use a different static
address, see section C.5 DMX Config Utility.
The information on this label will vary depending
on your configuration and firmware version.
Once the previous steps have been successfully completed you may now use the IP Address to:
> Install a printer driver, and start printing from your Windows applications. See section, C.6 Installing the
Printer Driver.
-or-
> If your printer is equipped with wireless capabilities, see section C.3 Network Card Setup - Wireless
for setup.
-or-
> Browse to the printer’s internal web pages for advanced configuration. See section, C.4 Printer’s
Internal Web Pages.