manualshive.com logo in svg

Datamax E-class E-3202, Руководство оператора

Поделиться
Скачать
Datamax E-class E-3202 Скачать руководство пользователя страница 5

Important Safety Instructions:

This printer has been carefully designed to give you many years of safe, reliable
performance. As with all electrical equipment, there are a few basic precautions
you should take to avoid hurting yourself or damaging the printer:

Ø

 

Carefully read the installation and operating instructions provided with
your printer.

Ø

 

Read and follow all warning instruction labels on the printer.

Ø

 

Place the printer on a flat, firm, solid surface.

Ø

 

To protect your printer from overheating, make sure all openings on the
printer are not blocked.

Ø

 

Do not place the printer on or near a heat source.

Ø

 

Do not use your printer near water, or spill liquid into it.

Ø

 

Be certain that your power source matches the rating listed on your
printer. If you are unsure, check with your dealer or with your local
power company.

Ø

 

Do not place the power cord where it will be walked on. If the power
cord becomes damaged or frayed replace it immediately.

Ø

 

Do not insert anything into the slots or openings on the printer.

Ø

 

Only qualified, trained service technicians should attempt to repair your
printer.

Содержание E-class E-3202































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды